System MAC address setting
Name
sysmac
Details
| Type | Byte sequence |
|---|---|
| DHCP option number | not applicable |
| ISC dhcpd syntax | not applicable |
Examples
Display the system MAC address
iPXE> show sysmac net0/mac:hex = 52:54:00:aa:bb:cc
Check if system MAC address is enabled
isset ${sysmac} && echo System MAC is ${sysmac} ;
Set interface "net2" to use the system MAC address
set net2/mac ${sysmac}
Description
Specifies the system MAC address applied to externally pluggable USB network cards (or docking stations).
See also
Notes
The “system MAC address” is not the standard hardware MAC address associated with a network interface. It is a MAC address that is associated with a whole system (typically a laptop), and is used to override the hardware MAC address of an externally pluggable USB network card (or docking station).
This setting is available only when using an iPXE build that includes support for externally pluggable USB network cards.
The system BIOS will typically allow the system MAC address (often labelled “MAC address passthrough”) to be disabled. When the system MAC address is disabled, the sysmac setting will have no value.
